Star Screwdriver Bits (fit Torx screws) | Chapman MFG
Star Screwdriver Bits (fit Torx screws) | Chapman MFG
Couldn't load pickup availability
*The Star screwdriver bits fit Torx screws and unlike the other Torx screwdriver bits, have the signature Chapman snap ring groove and knurl end.
Torx screws are commonly found on the following, automobiles & motorcycles (GM especially), bicycle brake systems (disc brakes), computer systems & hard disk drives, consumer appliances & electronics, CNC machines, appliances, Jeep Wranglers, firearm scopes and mounts, dental, medical, x-ray, electronics, drones and knives. The Star Bits are also in the Master Kit 5575
S6 / T6 | .066" | 5" lbs | 6.5" lbs |
S8 / T8 | .090" | 12 | 16 |
S10 / T10 | .107" | 20 | 45 |
S15 / T15 | .128" | 34 | 68 |
S20 / T20 | .151" | 56 | 108 |
S25 / T25 | .173" | 84 | 168 |
S27 / T27 | .195" | 119 | 200 |
S30 / T30 | .216" | 166 | 200 |
S40 / T40 | .260" | 200 |
CM-13 mini ratchet is rated at 200" lbs of torque, which is the typical torque of 4 large screwdrivers. Most of our bits are rated at less than 200" lbs based on the torque of the screws they fit.
Chapman Precision Screwdriver Bits
Chapman Precision Screwdriver Bits
• Precision milled to tight tolerances with flat edges, sharp corners & no burrs for snug screw fit
• Machined from USA steel & heat treated with a black oxide rust inhibitor finish
• Bits are engineered to bend/break BEFORE damaging the screw they fit
• Each bit has ears/ring stops with ball detent to hold the bit securely in our tools
• Bits have knurled ends for finger tightening & are stamped with the part #
• Non-magnetic for use on electronics & PC boards
Click here for more information on why Chapman bits are Bits That Don't Screw Up
Shipping & Warranty
Shipping & Warranty
Tools can be returned/exchanged in new condition within 45 days of receipt of shipment.
• Refunds are issued once the tools arrive to us
• Shipping & handling charges are non-refundable
• Contact us for a return authorization #
Domestic orders shipped next business day via USPS.
• International orders ship in 3 business days
• UPS, FedEx, DHL available - please contact us
Tools are guaranteed to be as represented & free of defects caused by defective materials/faulty workmanship.
• To keep open stock part prices reasonable, we can not offer replacement of worn tools that wear out/break
• Tool replacement requires that faulty parts are returned with proof of purchase within 3 years
• Warranty does not cover products that are improperly used/abused/altered
- Free international replacement(s) are not always available
USA Made: Old Fashioned Quality and State of the Art Craftsmanship
USA Made: Old Fashioned Quality and State of the Art Craftsmanship
Chapman tools are made in Durham, CT from USA materials. We support American made machinery tool and die makers, fabricators, metal finishers, machine part manufacturers and other local service providers. Your support of Chapman MFG in turn supports all the American workers
that we rely on!
Many people say that they "don't make things like they used to." Here at Chapman, our famous midget ratchet and screwdriver bits are essentially unchanged since 1936. We've added more tools and different types of bits since our inception, but the basic assemblies are unchanged.
We precision mill our screwdriver bits on modern equipment that hold tight critical tolerances and produce screwdriver bits with sharp corners, flat ends and no burrs to fit straight and snug into fastener heads. They're heat treated to specific tolerances and then finished with a rust inhibitor black oxide coating.
Our famous midget ratchets are punched from USA stainless steel, hand assembled, inspected and tested before placed into a tool set.
Each set is then also hand inspected, assembled and the accompanying brochure is signed by the assembler. Every kit and part shipped out of our shop is inspected again by a different team member before shipment.
![Star Screwdriver Bit - S6 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S6.jpg?v=1678725262&width=1445)
![Star Screwdriver Bits (fit Torx screws) | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/torx_688x688_a7608281-2164-42c1-9626-52fa8a516964.jpg?v=1594072425&width=1445)
![Our Bit Measurements Chart of bit width x thickness | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/Conversion_Chart_f8b8a7c7-1dbd-4bf5-b121-cd88b02d48fe.jpg?v=1594072545&width=1445)
![Star Screwdriver Bit -T27 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/T27.jpg?v=1673969425&width=1445)
![Star Screwdriver Bit - S8 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S8.jpg?v=1678725281&width=1445)
![Star Screwdriver Bit - S10 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S10_8e65ca09-438f-4819-b3b5-06a80bce8ed5.jpg?v=1678725296&width=1445)
![Star Screwdriver Bit - S15 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S15_f1155db7-f267-460a-a3eb-bee7b6d15a82.jpg?v=1678725316&width=1445)
![Star Screwdriver Bit - S20 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S20-2.jpg?v=1678725333&width=1445)
![Star Screwdriver Bit - S25 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S25_07270874-df93-4ba8-a225-c6b8e19539b0.jpg?v=1678725348&width=1445)
![Star Screwdriver Bit - S30 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S30_fddf103a-ff36-428e-93cb-5066c9dbc431.jpg?v=1678725364&width=1445)
![Star Screwdriver Bit - S40 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/S40_dc747616-e1ac-4310-bdc0-19a4b50ca77c.jpg?v=1678725385&width=1445)
![Star Screwdriver Bit - T27 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/T_27.jpg?v=1679083125&width=1445)
![Star Screwdriver Bit - T27 | Chapman MFG](http://chapmanmfg.com/cdn/shop/products/T_27_1.jpg?v=1679083238&width=1445)